Beatgrid

You can adjust the beatgrid.

•​You can’t adjust the beatgrid for tracks that haven’t been analyzed by rekordbox.

Adjusting the beatgrid

1​Press and hold the rotary selector on the WAVEFORM screen.

[GRID ADJUST] is displayed.

2​Turn the rotary selector to adjust the beatgrid.

•​You can adjust the beatgrid on the active deck.

•​You can also adjust the beatgrid using the following on the Grid Adjust panel.

–​[SNAP GRID(CUE)]: Moves the first beat position to a cue point.

–​[SHIFT GRID]: Applies the settings (Pitch Bend, etc.) adjusted during synchronization.

–​[<1/2], [1/2>]: Moves the beatgrid by 1/2 beat.

•​Touch [RESET] to reset to the original beatgrid.