You can record the same audio as the output from the [MASTER 1] and [MASTER 2] terminals into a WAV file on a USB storage device.
•The recorded file name will be “REC***.WAV” (*** is a 3-digit number).
1Connect a USB storage device to a USB port on the unit.
⇨Storage device connection (USB)
2Press the [MIXER SETTINGS] button.
The [MIXER SETTINGS] screen appears.
3Touch [Start 
] of [USB REC].
Recording starts.
•Recording isn’t available when;
–A Bluetooth device is selected on the [SOURCE] screen.
–Tracks from the streaming service is playing.
•You can record for about 90 minutes on a USB storage device with 1GB of free space.
•Touch 
(Stop) to end recording.
Splitting a track during recording
1Touch 
(Track Marks) during recording.
The file is split at the point where (Track Marks) is touched, and the recording continues as a new file from the split point.