You can adjust the beatgrid.
•You can’t adjust the beatgrid for tracks that haven’t been analyzed by rekordbox or this unit.
1Press and hold the rotary selector on the waveform screen or touch [ZOOM]/[GRID] on the screen.
Grid Adjust mode turns on.
2Turn the rotary selector to adjust the beatgrid.
•You can adjust the beatgrid on the active deck.
•You can also adjust the beatgrid using the following buttons on the screen.
–[SNAP GRID(CUE)]: Moves the first beat position to a cue point.
–[SHIFT GRID]: Applies the settings (Pitch Bend, etc.) adjusted during synchronization.
–[<1/2], [1/2>]: Moves the beatgrid by 1/2 beat.
•Touch [RESET] to reset to the original beatgrid.
•To return to Zoom mode, press and hold the rotary selector on the waveform screen again or touch [ZOOM]/[GRID] on the screen.
•Press the [DECK SELECT] buttons to switch between decks.