You can record the same audio as the output from the [MASTER 1] and [MASTER 2] terminals into a WAV file on a USB device.
•The recorded file name will be “REC***.WAV” (*** is a 3-digit number).
•Because this unit doesn’t have a clock, the recording time and date aren’t registered on the USB device.
1Insert a USB device to a USB port on the unit.
2Press the [MIXER SETTINGS] button.
The [MIXER SETTINGS] screen appears.
3Select the USB device and touch [Rec].
Recording starts.
•Recording isn’t available when [Bluetooth] is selected with the input selector.
•You can record for approximately 90 minutes on a USB device with 1GB of free space.
•Touch [Rec] again to end recording. Recording stops and the button light turns off.
Splitting a track during recording
1Press the [MIXER SETTINGS] button.
The [MIXER SETTINGS] screen appears.
2Touch [Track Mark] during recording.
The file is split at the point where [Track Mark] is touched, and the recording continues as a new file from the split point.