Slip

If you turn Slip mode on, normal playback continues in the background (but you can’t hear it) when you perform the following operations.

When you end the operation, Slip is canceled and normal playback starts from the exact point the track would have reached by then. This means the original rhythm remains constant and your performance stays perfectly in time.

Function	Description
Slip Pause	If you press the [] button during playback in Vinyl mode, playback continues in the background during the pause. ⇨Setting the jog wheel mode
Slip Scratch	If you scratch a track using the jog wheel while in Vinyl mode, normal playback continues in the background while you are scratching. ⇨Setting the jog wheel mode
Slip Loop	If you start loop playback, normal playback continues in the background while the loop is playing. ⇨Setting a loop
Slip Reverse	If you press the [SLIP REV] button during playback, playback is reversed. Normal playback continues in the background during reverse playback.
Slip Hot Cue/Loop	If you press a Performance Pad with a Hot Cue/Loop set during playback, the playback point jumps to the Hot Cue/Loop point and playback continues until you release the button. Normal playback continues in the background during Hot Cue/Loop playback.

Turning Slip mode on

1Press the [SLIP] button.

Slip mode turns on and the [SLIP] button lights up.

•The [SLIP] button blinks while Slip is in use.

•The current playback point in Slip mode is indicated by a yellow line on the overall and enlarged waveforms on the waveform screen.
The background playback point is indicated by a white line on the overall waveform on the waveform screen.

•Press the [SLIP] button again or load a track to turn off Slip mode.