You can quickly call up a cue point you have set previously.
1Press the [CUE] button during pause.
A cue point is set.
•Turn the jog wheel during pause to fine-adjust (0.5 frame unit) the pause position.
•If you set a new cue point, the previously set cue point is cleared.
•You can set a loop-in point if you set a loop as a cue point by pressing the [BEAT LOOP (RELOOP)] knob during playback.
•When [ON] is set for [Smart Cue] on the [DECK SETTINGS] screen or in the Utility settings, if you set a Hot Cue or start playback from a Hot Cue, the point is set as a cue point.
Checking a cue point (Cue Point Sampler)
1Jump to a cue point.
2Press and hold the [CUE] button.
Playback continues while pressing the [CUE] button.
•Press the 
button to continue playback even if you release the [CUE] button.
2Press the [DECK SETTINGS] button.
The settings of the deck is displayed on the [DECK SETTINGS] screen.
3Touch [MEM/DEL] for [MEMORY CUE].
•If you do this during cue standby and the saved cue point is the same as the cue point in standby, the saved cue point is deleted.
1Load a track you have previously saved a cue point for.
2Press the [DECK SETTINGS] button.
The settings of the deck is displayed on the [DECK SETTINGS] screen.
3Touch 
or 
for [MEMORY CUE].
⇨ Calling up a saved cue point
2Press the [DECK SETTINGS] button.
The settings of the deck is displayed on the [DECK SETTINGS] screen.
3Touch [MEM/DEL] for [MEMORY CUE].
When loading a track or performing Track Search, a cue point can be automatically set to the position immediately before the first sound in the track (skipping any silence at the beginning).
1Press the [DECK SETTINGS] button.
The [DECK SETTINGS] screen appears.
2Touch [ON] for [Auto Cue (Memory Cue)] to turn it on.
•The Auto Cue setting is retained even if you turn the unit off.
•You can set the sound pressure level that you want to be recognized as silence in [Auto Cue Level] in the Utility settings. The sound pressure level is displayed on the [MEMORY CUE] panel.