You can quickly call up a Hot Cue point by pressing the [Hot Cue (A to H)] buttons and start playback from that point in the track.
Hot Cues saved on a USB storage device will be automatically called up when tracks are loaded.
1Press one of the [Hot Cue (A to H)] buttons at the point where you want to set a Hot Cue.
A Hot Cue is set to the button.
•If you do this during loop playback, a loop is set instead.
•When [ON] is set for [Smart Cue] on the [DECK SETTINGS] screen or in the Utility settings, if you set a Hot Cue or start playback from a Hot Cue, the point is set as a cue point.
•You can set up to 8 Hot Cues per track.
•The [Hot Cue (A to H)] displays on the screen light up as follows according to the set function. You can change the colors using rekordbox.
•You can’t set a Hot Cue to any [Hot Cue (A to H)] buttons that have a one set already. To set a new Hot Cue, delete a one from a button first.
Starting playback from a Hot Cue
1Press one of the [Hot Cue (A to H)] buttons that have a Hot Cue set.
Playback starts from the Hot Cue point.
•When [ON] is set for [Smart Cue] on the [DECK SETTINGS] screen or in the Utility settings, if you set a Hot Cue or start playback from a Hot Cue, the point is set as a cue point.
•Press the [BEAT LOOP (RELOOP)] knob to cancel playback of the loop started with the [Hot Cue (A to H)] button.
Starting gate playback from a Hot Cue
1Press the [DECK SETTINGS] button.
The [DECK SETTINGS] screen appears.
2Touch [ON] for [Gate Cue].
Gate Cue mode turns on.
•You can also turn on Gate Cue mode with [Gate Cue] in the Utility settings.
3Press and hold a [HOT CUE (A to H)] button that has a Hot Cue set while the track is paused.
Playback starts from the Hot Cue point and continues until you release the [HOT CUE (A to H)] button.
•If you do this when a loop is set, loop playback starts.
•Press the 
button during gate playback to continue playing the track after you release the [HOT CUE (A to H)] button.