You can quickly call up a cue point you have set previously.
A cue point is set.
•Press the [SEARCH 
] or [SEARCH 
] button or turn the jog wheel during pause to fine-adjust the pause position.
1Press the [LOOP IN/CUE (IN ADJUST)] button.
•If you set a new cue point, the previously set cue point is cleared.
•When [On] is set for [Overwrite Current Cue with Hot Cue (Smart Cue)] in the Utility settings, if you set a Hot Cue or start playback from a Hot Cue, the point is set as a cue point.
1Press the [CUE] button during playback.
The track jumps to the cue point and cue standby mode turns on.
Checking a cue point (Cue Point Sampler)
1Jump to a cue point.
2Press and hold the [CUE] button.
Playback continues while pressing the [CUE] button.
•Press the [
] button to continue playback even if you release the [CUE] button.
1Load a track you have previously saved a cue point for.
2Press the [CUE/LOOP CALL 
] or [CUE/LOOP CALL 
] button.
2Press the [DELETE] button.
When loading a track or performing Track Search, a cue point can be automatically set to the position immediately before the first sound in the track (skipping any silence at the beginning).
1Press the [SHORTCUT] button.
The [SHORTCUT] screen appears.
⇨Changing the settings on the Shortcut screen
2Touch [ON] for [Auto Cue].
[AUTO CUE] is displayed on the waveform screen when Auto Cue is turned on.
•The Auto Cue setting is retained even if you turn the unit off.
•You can set the sound pressure level that you want to be recognized as silence in [Auto Cue Level] in the Utility settings.