Headphones section

1.​SonicLink headphone indicator/PAIRING button

Press and hold the [PAIRING] button to put the unit into SonicLink pairing mode.

•​The SonicLink headphones indicator blinks quickly during pairing, and the light turns solid when the headphones are paired with the unit.

2.​MASTER button

Outputs the master channel sound from headphones.

3.​CUE 1/2 buttons

Selects the channel (1/2) to output sound from headphones.

4.​MIX knob

Adjusts the volume balance between the master sound, Touch Preview sound and the channel selected with the [CUE 1/2] buttons.

•​Set the knob all the way to the left to monitor only the channel sound/Touch Preview sound, and all the way to the right to monitor only the master sound.

5.​LEVEL knob

Adjusts the volume for sound output from headphones.

Monitoring with headphones

1​Connect headphones to the PHONES terminal.

⇨Front panel

2​Press the [CUE 1] or [CUE 2] button to select the channel to monitor.

•​This operation isn’t necessary when monitoring the sound of Touch Preview.

•​Set the headphones output sound ([MONO SPLIT]/[STEREO]) in [Headphones] on the [MIXER SETTINGS] screen or in [Headphones Mono Split/Stereo] in the Utility settings.

⇨Headphones

⇨Headphones Mono Split/Stereo

3​Turn the [MIX] knob to adjust the volume balance between the channel sound and the master sound.

•​Set the volume balance of the Touch Preview sound in [Touch Preview Volume] on the [MIXER SETTINGS] screen.

⇨Touch Preview Volume

4​Turn the [LEVEL] knob to adjust the volume.

Monitoring with SonicLink headphones

1​Press the [MIXER SETTINGS] button.

The [MIXER SETTINGS] screen appears.

2​Touch [ON] for [SonicLink].

•​You can also turn it on in [SonicLink] in the Utility settings.

⇨SonicLink

3​Turn on SonicLink headphones and put them into Pairing mode.

•​This unit doesn’t support touch pairing.

•​For details on the pairing process for SonicLink headphones, refer to their instruction manual.

4​Press and hold the [PAIRING] button.

The unit enters pairing mode.

•​The SonicLink headphones indicator blinks quickly during pairing, and the light turns solid when the headphones are paired with the unit.

•​If you use the headphones that were last paired with the unit, they’ll automatically connect when you turn them on – there’s no need to use the [PAIRING] button.