Settings

Changing the settings

1Press and hold the [MENU] button.

The [UTILITY] screen appears.

1.Category

2.Setting items and current setting values

3.Setting values

2Select a category.

3Select a setting item.

⇨Utility settings

4Select a setting value.

•Press the [MENU] button to close the [UTILITY] screen.

Utility settings

Deck category

*: Factory setting

Setting item		Description
Eject/Load Lock		Eject Lock: Determines whether or not you can unload a loaded track during playback. Load Lock: Determines whether or not you can load another track during playback. •Setting values: Unlock^*, Lock •[Eject Lock]: [Unlock]: You can unload a loaded track during playback. [Lock]: You can’t unload a loaded track during playback. •[Load Lock]: [Unlock]: You can load another track during playback. [Lock]: You can’t load another track during playback.
Quantize Beat Value (Deck)		Sets the number of beats for Quantize. •Setting values: 1/8 Beat, 1/4 Beat, 1/2 Beat, 1 Beat*
Hot Cue Auto Load		Determines whether or not Hot Cues/Loops are automatically called up when you load a track. ⇨Calling up Hot Cues •Setting values: Off, On*
Hot Cue Color		Turns on and off the lighting color setting for the [HOT CUE] (A to H) buttons. ⇨Hot Cue/Gate Cue •Setting values: Off*, On
Overwrite Current Cue with Hot Cue (Smart Cue)		Determines whether or not a cue point is automatically set when a Hot Cue/Loop is set or playback starts from a Hot Cue/Loop. ⇨Setting a cue point ⇨Setting a Hot Cue ⇨Starting playback from a Hot Cue point •Setting values: Off*, On
Auto Cue Level		Sets the sound pressure level that Auto Cue recognizes as silence. •Setting values: Memory Cue*, Hot Cue, -78dB, -72dB, -66dB, -60dB, -54dB, -48dB, -42dB, -36dB •[Memory Cue]: Sets the saved cue/loop point closest to the beginning of a track to an Auto Cue point. •[Hot Cue]: Sets the saved Hot Cue/Loop point closest to the beginning of a track to an Auto Cue point.
Vinyl Speed Adjust		Sets the adjustment method for the playback starting and stopping speeds in Vinyl mode. ⇨Adjusting the playback starting and stopping speeds (for Vinyl mode) •Setting values: Touch&Release, Touch*, Release
Vinyl Speed Adjust Time		Sets the Vinyl Speed Adjust speed. ⇨Adjusting the playback starting and stopping speeds (for Vinyl mode) •Setting values: 1, 2, 3*, 4, 5
Play Mode		Sets playback mode. •Setting values: Continue, Single* •[Continue]: Automatically loads the next track when playback reaches the end of a track. •[Single]: Stops playback when playback reaches the end of a track. The next track isn’t automatically loaded.
Jog Ring Brightness		Sets the brightness of the jog ring illumination. •Setting values: Off, 1, 2*
Jog Ring Indicator		Determines whether or not to blink the jog ring illumination when playback reaches the end of a track. •Setting values: Off, On*
PRO DJ LINK Mode		Sets whether or not to connect the unit with a PRO DJ LINK compatible player. •Setting values: Off*, On •When set to [On], you can’t use Deck 3 and Deck 4 on the unit. •You can’t connect the unit with a PRO DJ LINK compatible player while the internal wireless connection (Wi-Fi) on the unit is being used.

Mixer category

*: Factory setting

Setting item		Description
Channel Input Select Memory		Determines whether or not to save the [DECK3 Input Select] and [DECK4 Input Select] settings. •Setting values: Off*, On •The setting isn’t saved when [Bluetooth] is selected. Instead, [DECK/] is selected when the unit is turned on. •If the setting is saved when [PHONO] is selected, sound may be output at a high volume depending on the signal input to the unit when it’s turned on. Make sure the input signal is appropriate for the settings to avoid this.
DECK3 Input Select		Sets the input source for Deck 3 from devices connected to the unit. •Setting values: DECK/, LINE, PHONO, Bluetooth •[DECK/]: Selects the deck of the unit or a PC/Mac connected to the USB port of the unit. •[LINE]: Selects a multi player, etc., connected to the [LINE/PHONO] terminals on the unit. •[PHONO]: Selects a turntable, etc., connected to the [LINE/PHONO] terminals on the unit. •[Bluetooth]: Selects a PC/Mac or mobile device connected to the unit via Bluetooth.
DECK4 Input Select		Sets the input source for Deck 4 from devices connected to the unit. •Setting values: DECK/, LINE, PHONO, Bluetooth •[DECK/]: Selects the deck of the unit or a PC/Mac connected to the USB port of the unit. •[LINE]: Selects a multi player, etc., connected to the [LINE/PHONO] terminals on the unit. •[PHONO]: Selects a turntable, etc., connected to the [LINE/PHONO] terminals on the unit. •[Bluetooth]: Selects a PC/Mac or mobile device connected to the unit via Bluetooth.
CH3 Control Tone		Sets the time code signal to send to CH 3 from devices connected to the [PHONO] or [LINE] input terminals. •Setting values: LINE*, PHONO
CH4 Control Tone		Sets the time code signal to send to CH 4 from devices connected to the [PHONO] or [LINE] terminals. •Setting values: LINE*, PHONO
EQ / ISO		Sets the function (equalizer or isolator) to adjust with the [EQ/ISO (HI, MID, LOW)] knobs. •Setting values: EQ*, ISO
Channel Fader Curve		Sets the channel fader curve. ⇨Setting the channel fader •Setting values: Curve1, Curve2*, Curve3
Crossfader Curve		Sets the crossfader curve. ⇨Setting the crossfader •Setting values: Curve1*, Curve2, Curve3
Master EQ		Sets the function ([Master Out] or [Master and Booth Out]) to adjust with the Master EQ [HI, MID, LOW] knobs. ⇨Adjusting the sound •Setting values: Master Out*, Master and Booth Out •[Master Out]: Applies Master EQ only to the master sound. •[Master and Booth Out]: Applies Master EQ to the master sound and booth monitor sound.
DECK1 Crossfader Assign		Assigns the channel output sound to the crossfader. •Setting values: A, THRU*, B •[A]: Assigns to the [A] (left) side. •[THRU]: Bypasses the crossfader. •[B]: Assigns to the [B] (right) side.
DECK2 Crossfader Assign
DECK3 Crossfader Assign
DECK4 Crossfader Assign
SonicLink		Turns SonicLink on and off. •Setting values: Off, On*
Headphones Stereo / Mono Split		Sets the output method ([Stereo] or [Mono Split]) for the headphones monitor sound. •Setting values: Stereo*, Mono Split
LINK Preview Volume		Sets the attenuation level of the Link Cue sound. •Setting values: -9dB, -6dB, -3dB, 0dB*
USB Output Level		Sets the attenuation level of the sound output from the USB port (Type-C). •Setting values: -19dB*, -15dB, -10dB, -5dB
Mic Output to Booth		Determines whether or not to output the microphone sound to the [BOOTH] terminals. •Setting values: Off, On*
Mic Output to Master REC		Determines whether or not to output the microphone sound to Master Rec (recording sound). •Setting values: Off, On*
Mic Output to USB		Determines whether or not to output the microphone sound to the USB port (Type-C). •Setting values: Off, On*
BEAT FX MIC		Sets the microphone to apply Beat FX to. ⇨Using Beat FX •Setting values: MIC1, MIC2, MIC1+2*
Feedback Reducer		Sets Feedback Reducer that cuts only that frequency band to reduce the “howling” while minimizing the effect on sound quality when microphone “howling” noise occurs (feedback). ⇨Reducing the “howling” noise of a microphone (Feedback Reducer) •Setting values: Off, Light, Heavy*
Talkover Mode		Sets Talkover mode. •Setting values: Advanced*, Normal •[Advanced]: Outputs sound by attenuating only the mid-frequency range of the sound from channels other than the Mic channels according to the setting of the [LEVEL] knob. •[Normal]: Outputs sound by attenuating the sound from channels other than the Mic channels according to the [LEVEL] knob setting.
Talkover Level		Sets the sound attenuation level for Talkover. •Setting values: -24dB, -18dB*, -12dB, -6dB

Audio Output category

*: Factory setting

Setting item		Description
Master Attenuator		Sets the attenuation level of the sound output from the [MASTER 1] and [MASTER 2] terminals. •Setting values: -12dB, -6dB, 0dB*
Master Peak Limiter		Sets whether or not to reduce sudden and unpleasant digital clips that occur on the master output. •Setting values: Off, On*
Master Mono / Stereo		Sets the output method (monaural or stereo) for the master sound. •Setting values: Mono, Stereo*
Booth Monitor Attenuator		Sets the attenuation level of the sound output from the [BOOTH] terminals. •Setting values: -12dB, -6dB, 0dB*
Booth Monitor Mono / Stereo		Sets the output method (monaural or stereo) for the sound output from the [BOOTH] terminals. •Setting values: Mono, Stereo*

Display category

*: Factory setting

Setting item		Description
On Air Display		Determines whether or not to display On Air Display. •Setting values: Off, On*
Waveform Current Position		Sets where to display the current playback point (center or left) on the waveform. •Setting values: Left*, Center
Waveform Divisions		Selects time scale or phrase data to display under the playing address on the overall waveform. •Setting values: Time Scale, Phrase* •[Time Scale]: Displays scale marks at 30-second intervals. •[Phrase]: Displays the phrase data analyzed by rekordbox. •If phrase data isn’t saved, time scale is displayed.
Waveform Display		Set the deck display section, overall waveform display section, deck information display section, and enlarged waveform display section on the 2DECK display or 4DECK display. •Setting values: 2deck*, 2/4deck, 4deck
Image On-Jog Display		Sets an image to display on the artwork display on the jog wheel. •Setting values: Artwork*, Custom Image •[Artwork]: Displays the artwork of the loaded track. •[Custom Image]: Displays a JPEG saved in the root directory of the storage device that the loaded track is saved on. Images larger than 800 x 800 pixels can’t be displayed on this unit.
Slip Flashing		Determines whether or not the indicators blink for buttons that can be used for Slip when you press the [SLIP] button. •Setting values: On*, Off
LCD Brightness (Main Display)		Sets the brightness of the main display. •Setting values: 1, 2, 3*, 4, 5
LCD Brightness (Jog Display)		Sets the brightness of the jog display. •Setting values: 1, 2, 3*, 4, 5

Network category

Setting items		Description
Wi-Fi Setting		Sets up the connection via a wireless router (access point). ⇨Wireless LAN (Wi-Fi®) connection
Wi-Fi Frequency		Sets the Wi-Fi frequency band. •Setting values: 5GHz (Recommended)*, 2.4GHz/5GHz
Wi-Fi Address		Displays IP address and MAC address for the wireless LAN (Wi-Fi) connection.
Ethernet Info		Displays IP address and MAC address for the wired LAN connection.

Bluetooth category

Setting items	Description
Bluetooth Setting	Sets up the connection via Bluetooth. ⇨Bluetooth®/MD connection

Setting items

Description

Bluetooth Setting

Sets up the connection via Bluetooth.

⇨Bluetooth®/MD connection

General category

*: Factory setting

Setting item		Description
Language		Sets the display language.
Screen Saver		Sets the screen saver. •Setting values: Off, On* •When set to [On], the screen saver starts if: –You don’t use the unit for more than 5 minutes when a track isn’t loaded. –You don’t use the unit for more than 100 minutes during pause, during cue standby, or after playback reaches the end of a track. •Use the unit to cancel the screen saver.
Power Management		Sets the Power Management function. ⇨Power Management •Setting values: Never, 20min*
Restore Defaults		Restores the settings to the factory settings. •Setting values: Cancel*, Ok
Serial No.		Displays the serial number.
License		Displays the license information of the unit.
Version No.		Displays the version of the software on the unit. •When connected to the Internet, an update notification will be displayed if a firmware update is available.

■Power Management

When [Power Management] is set to [20min], the unit automatically enters Off mode after 20 minutes without being used in the following ways.

–No audio signal is input to the unit.

–The unit isn’t connected in the PRO DJ LINK network.

–No storage device is connected to the unit.

–No PC/Mac is connected to the unit via the USB port on the rear of the unit.

Press the [QUANTIZE] button to exit Off mode.

•The factory setting is [20min].

•Set [Power Management] to [Never] if you don’t need to use the Power Management function.

•Power consumption will increase if [Power Management] is set to [Never].

Wireless LAN (Wi-Fi^®) connection

■Connecting the unit to a wireless network

1Press and hold the [MENU] button.

The [UTILITY] screen appears.

2Select [Wi-Fi Setting] in the Network category.

The [Wi-Fi Setting] screen appears.

3Touch [Wi-Fi] to turn it on.

The unit searches the network and available SSID are listed.

1. ICON_WiFi (Wi-Fi connection icon)

2.Wi-Fi On/Off

3.SSID list

4Touch the network (SSID) you want to use.

The password input screen appears.

5Enter a password and touch [CONNECT].

If the connection succeeds, [CONNECTED] is displayed in the network name (SSID) field and it’s displayed at the top of the list.

•You don’t need to do this if you’re using an access point that’s connected with the unit previously.

•Touch the network (SSID) you’re using to view its information on the network information screen. If you turn on [AUTO-CONNECT] on the network information screen, the unit automatically connects to the access point the next time you use it.

•To delete the networks (SSID) saved to the unit, touch [SAVED NETWORKS] at the bottom of the list. Select the networks (SSID) to delete in the list and touch [FORGET THIS NETWORK] on the network information screen.

Bluetooth^®/MD connection

You can input the sound of your PC/Mac or mobile device to the unit via Bluetooth.

■Pairing with a Bluetooth device

1Press and hold the [MENU] button.

The [UTILITY] screen appears.

2Select [Bluetooth Setting] in the Bluetooth category.

The [Bluetooth Setting] screen appears.

3Touch [Bluetooth] to turn it on.

1.Name of the connected device

2. ICON_BT (Bluetooth connection icon)

3.Bluetooth On/Off

4. Icon_trash (Remove device)

5.PAIRING

4Touch [PAIRING].

The unit enters pairing state.

•The Bluetooth indicator blinks while the unit is in pairing state (for approximately 2 minutes).

5Perform the pairing procedure on a Bluetooth device.

6Allow the connection on the unit.

The Bluetooth indicator on the unit stops blinking and lights up when the connection is established.

•Perform the pairing procedure on a Bluetooth device while the unit is in paring state. If the unit can’t pair with a Bluetooth device within 2 minutes, the Bluetooth indicator turns gray.

•For details on the pairing procedure for the Bluetooth device, refer to the device’s instruction manual.

•If you use a Bluetooth device registered to the unit, the unit automatically connect the device when Bluetooth is turned on.

•You can only connect the unit to one Bluetooth device at a time. If the unit pairs with a second device, the registration of the first device will be lost. To register the first device again, perform pairing with the device.

•Touch Icon_trash to connect with other Bluetooth device than the registered one.

Changing the settings on the Shortcut screen

1Press the [SHORTCUT] button.

The [SHORTCUT] screen appears.

2Select a setting value.

⇨Setting items on the Shortcut screen

•Press the [SHORTCUT] button again to close the [SHORTCUT] screen.

Setting items on the Shortcut screen

Setting item		Description
Quantize
	Quantize Beat Value	Same as the Utility settings ⇨Utility settings
Vinyl Speed
	Vinyl Speed Adjust	Same as the Utility settings ⇨Utility settings
	Vinyl SpeedAdjust Time	Same as the Utility settings ⇨Utility settings
Waveform
	Waveform Current Position	Same as the Utility settings ⇨Utility settings
	Waveform Divisions	Same as the Utility settings ⇨Utility settings
Display
	Image On-Jog Display	Same as the Utility settings ⇨Utility settings
	Pad Info Display	Determines whether or not to display the pad information on the jog wheel display.
LCD Brightness
	Main Display	Same as the Utility settings ⇨Utility settings
	JOG Display	Same as the Utility settings ⇨Utility settings

Changing the settings on the Mixer Settings screen

1Press the [MIXER SETTINGS] button.

The [MIXER SETTINGS] screen appears.

2Select a setting value.

⇨Setting items on the Mixer Settings screen

•Press the [MIXER SETTINGS] button again to close the [MIXER SETTINGS] screen.

Setting items on the Mixer Settings screen

Setting item		Description
Mic Settings
	Feedback Reducer	Same as the Utility settings ⇨Utility settings
	BEAT FX MIC	Same as the Utility settings ⇨Utility settings
Recording Settings
	Recording Device	Sets a recording device. ⇨Recording
	MIC Output to Master REC	Same as the Utility settings ⇨Utility settings
	Rec	Starts recording. ⇨Recording
	Track Mark	Split a track while recording. ⇨Splitting a track during recording
DECK3 Input Select		Same as the Utility settings ⇨Utility settings
DECK4 Input Select
EQ / ISO
Headphones Stereo / Mono Split
Channel Fader Curve
Crossfader Curve
LINK Preview Volume
Cross Fader Assign

Calling up My Settings saved on a USB device

You can call up My Settings from a USB device.

•You can call up My Settings from a storage device (connected to a player), rekordbox, or CloudDirectPlay connected in the Pro DJ Link network.

1Connect a USB device to the unit.

⇨Connecting storage devices

2Press the [SOURCE] button.

The [SOURCE] screen appears.

3Select a device.

4Touch ICON_setting .

The Device Settings screen appears.

5Touch [LOAD] in [MY SETTINGS].

My Settings are called up.

•You can’t call up My Settings when a track is playing. Pause the playback before calling up the settings.

•Touch ICON_setting again to close the Device Settings screen.